You’ll need to hammer the ends of the nails down inside the box to keep things safe for planting. H Brown Resin Deck and Porch Rail Planter The Emsco Group Bloomers Rail Planter is The Emsco Group Bloomers Rail Planter is a beautiful accent to any porch or deck. Repeat the same process for the top trim. (Note: I found that if cuts weren’t perfect, it was best to leave the excess hanging off of one end, then trim with a hack saw later.) Next, secure the second 7″ 1″ x 2″ with adhesive and nails and secure the last 48″ 1″ x 2″ trim board. Apply a thin bead of adhesive on the inside and secure to the bottom of the box with nails. Secure one 48″ 1″ x 2″ board to a 7″ 1″ x 2″ with a single nail to make one corner of the bottom trim. Related: 10 Inspired DIY Planters to Dress Up Your Garden 3. These containers have the ability to fit. (Warning: Woodworking adhesive is very sticky and difficult to remove, so be careful and clean your work as you go.) Apply a bead of adhesive to the edges of the planter bottom and sides and attach a 46-1/2″ 1″ x 8″ side board with several nails. With removable drain plugs, you can easily bring your plants indoors or regulate the water drainage of the planter. Add to Favorites Set of 4pcs Deck Rail Planter (125) Sale Price 76.49 76.49. Add to Favorites Vibrant Pink Outdoor Railing Fence or Balcony Planter Flower Pot (946) 22.19. Place a thin bead of construction adhesive on the end of the 1″ x 6″ planter bottom and secure a 5-1/2” side board with three nails. Kulshan DIY Balcony Railing Planter Box Bracket Set for Decks (263) 60.99. Follow with the 5-1/2″ 1″ x 8″ and 7″ 1″ x 2″ pieces, being careful to dry-fit everything as you go, making adjustments as necessary.Ĭonstructing the Deck Rail Planter. Then cut the 1″ x 6″ planter bottom and 1″ x 8″ planter sides. Measure out and mark each board with a square before cutting. So be careful to measure when buying and as always, measure twice and cut once in the shop. However, some 1″ x 6″ boards are 5-3/4″ wide instead of 5-1/2″. And a 1″ x 6′ board is in actuality 5-1/2″ wide.

Note: In general, a 1″ board is in actuality 3/4″ thick. Jewsons landscaping supplies support driveway & paving projects and fencing & decking installation. You’ll have a little lumber left over, enough to use for a second planter or another project! 1″ x 8″ board)Ģ pieces of 1″ x 8″, 46-1/2″ inches in length

Pots for deck rails